How to Use Bissell Spot Clean Pet Pro?

Introduction

The Bissell Spot Clean Pet Pro is a powerful and portable carpet cleaner designed to tackle pet stains and messes effectively.

With its specialized tools and cleaning solutions, it offers a convenient way to keep your carpets and upholstery looking clean and fresh. This guide will walk you through the steps to use the Bissell Spot Clean Pet Pro properly.

Unboxing and Setup

What’s in the Box?

• Spot Clean Pet Pro Machine
• HydroRinse™ Self-Cleaning Tool
• Stain Trapper Tool
• Tough Stain Tool
• Trial Size Pet Stain & Odor Antibacterial Formula
• User Guide

Initial Setup

1. Assemble the Machine: Follow the user guide to assemble the machine correctly.
2. Fill the Clean Water Tank:
   • Remove the clean water tank by lifting it straight up.
   • Unscrew the cap and add warm (not boiling) water to the water fill line.
   • Add Bissell Pet Stain & Odor Antibacterial Formula to the formula fill line.
   • Replace the cap and secure the tank back into the machine.

Operating the Bissell Spot Clean Pet Pro

Pre-Treatment

1. Identify the Stain: Locate the pet stain or mess you need to clean.
2. Pre-Treat (Optional): For tough stains, use a pre-treating solution to help loosen the stain before cleaning.

Cleaning Process

1. Plug in the Machine: Plug the Bissell Spot Clean Pet Pro into an electrical outlet.
2. Select the Tool:
   • Use the Tough Stain Tool for general cleaning.
   • Use the Stain Trapper Tool for cleaning up particularly messy or wet stains.
3. Turn on the Machine: Switch the power on to start the cleaning process.
4. Apply Cleaning Solution:
   • Hold the tool slightly above the carpet or upholstery.
   • Press the spray trigger to release the cleaning solution.
   • Move the tool slowly back and forth over the stain.
5. Scrub and Extract:
   • Release the trigger and continue to move the tool over the stain to scrub and extract the dirty water.
   • For best results, make several passes over the area until no more dirt or water is being extracted.

Post-Cleaning

1. Empty the Dirty Water Tank:
   • Remove the dirty water tank by lifting it straight up.
   • Unscrew the cap and pour the dirty water into a sink or toilet.
   • Rinse the tank thoroughly and replace it back into the machine.
2. Rinse the Tools:
   • Use the HydroRinse™ Self-Cleaning Tool to flush out any remaining solution and debris from the tools.
3. Dry the Area: Allow the cleaned area to air dry thoroughly before using it again.

Maintenance Tips

Regular Cleaning

• Clean the Nozzles and Brushes: Regularly clean the nozzles and brushes to prevent clogs and maintain performance.
• Check for Wear and Tear: Inspect the machine and its parts for any signs of wear and tear. Replace parts as needed.

Storing the Machine

• Empty and Rinse Tanks: Always empty and rinse both the clean and dirty water tanks before storing the machine.
• Store in a Cool, Dry Place: Store the machine in a cool, dry place to prevent mold and mildew growth.

Conclusion

Using the Bissell Spot Clean Pet Pro effectively involves proper setup, thorough cleaning, and regular maintenance.

By following these steps, you can ensure your carpets and upholstery remain clean and free from pet stains and odors. The Bissell Spot Clean Pet Pro is a valuable tool for pet owners, making the task of maintaining a clean home much easier.

Sources:

1. Bissell – Spot Clean Pet Pro User Guide
2. Bissell – Product Support